Comfy but tricky fabric

Wow! It has been a long time since I last posted. But that does not mean I have not been sewing. This past weekend I delivered a baby quilt and 3 baby blankets with matching burp clothes for my new grandson who should be arriving any day now. I know his mom loves the soft blamkets but I had to make him a quilt because after all, it gave me another excuse (really who needs an excuse) to make a quilt.

So first here are the baby blankets.

Thes are all made with Soft and Minky fabric and flannel. These are so soft you just want to wrap yourself or the baby in them. Sometimes when sewing with Soft and Minky fabric it can be a bit of a challenge because it like to move around and stretch a bit. So my best success comes when I lay my flannel cut to size right side down on top of the right side of the Soft and Minky fabric. Then I add every pin I have all around. With my two pieces of fabric pinned together I take the whole thing to the sewing machine where I have my Digital Dual-Feed Foot installed.

And since I almost always have extra fabric I decided to create the matching burp clothes. Because what baby doesn’t need matching burp clothes and blankets?

Again using the Digital Dual-Feed foot makes these fast.

Notice on the orange burp I used a t-shirt knit for one side on the burp. Since the white was so plain I used a decorative stitch on my machine to stitch around the perimeter with a varigated thread to add some interest.

Here is the link to this foot https://www.babylock.com/accessories/feet-attachments/digital-dual-feed-foot and of course your local retailer can get this for you if you don’t have one. Otherwise look in your accessories that came with your machine and pull this bad boy out and put him on your machine, don’t forget to plug his short cord in on the upper back side of your machine. In the past I had used the walking foot but the Digital Dual-Feed foot makes my life so much easier.

And to satisfy my desire to quilt I made a baby quilt using this pattern http://minimushrooms.blogspot.com/p/bungalow-baby-quilt-pattern.html I did make it larger but I love how it turned out and the quilting was done on the my Babylock Solaris using Designs by JuJu Bubble end to end quilting design https://www.designsbyjuju.com/bubbles-end-to-end-quilting-embroidery-design This design is so easy to use and worked perfectly. Notice I onluy used the bubbles quilting design in the big blocks.

So now that grandma’s sewing is done, this little guy can arrive anytime so I can meet him!

Sewing cards and cards and cards

Have you been to the greeting card store lately? I was amazed at the prices, can you believe $7.95 for the inspired inscription “Wishing you a Happy Birthday”. And the sad thing is these store bought cards normally end up in the trash can.

I wanted to make the cards I sent a little more thoughtful and special. I started with a design from the Infinite Possibilities book.

This book is wonderful collaboration between BabyLock and Anita Goodesign.

Many BabyLock retailers have these books still available for purchase.

I created my first card following the recommended supply list and instructions in the book. Using standard cardstock which I cut down from 8 ½” x 11” to 7” x 10”, folded the cardstock in half to the new size  5” x 7”.  

Stitched out the design and this is my handcrafted greeting card –

This card will definitely show the recipient that my card is truly unique and not one of many from the shelf at local card store.

After admiring my work for a little while I knew I want to do more. I stitched another card in exactly the same way with the same materials.

This time I added  little more color, I used water color paint pens. In the tiny leaves I added some green paint, and the non-appliqued flowers I added yellow paint. I am not a painter and have limited experience with water color pens but this was a fun way to experiment and I like the addition of the color.

I really liked the card with the paint but I thought I could do more and I had a small piece of cork sitting on my table next to my other supplies.

So I used cork as my base fabric on my card front. I added fabric for the envelope to make it stand out. And I added yellow fabric under the yellow flower stitches. All thread used was the same as the first stitch out and the same fabric was used for the pink flowers. What a different look with just a change of base fabric and adding a couple more fabrics.

Oh, but wait there is piece of vinyl that ordered months ago and has stayed rolled up neatly in my supply closet. I tend to buy things like fabric and vinyl with no real plans but I always know that these things will find a home in a great project someday. Just sometimes those supplies like fabric and vinyl have to wait years for their perfect projects.

The only change this time is swapping out the cork for this great vinyl.

All cards made with the same thread and pink flower fabric. Not sure which is my favorite.

Finding UFOs and finishing them

I was digging through my pile of started and great idea projects that remain unfinished and I found these placemats that I had started about 10 years ago. I liked the blue back then and I still liked the blue but I knew that just finishing with stitch-in-the-ditch quillting, though very easy and fast to do, wasn’t going to satisfy me.

I often looked at and admired Sashiko (form of Japanese hand embroidery using the running stitch to create a pattern made almost entirely with dashed lines) quilts. Now I knew I was never going to be patient enough to do hours and hours of hand embroidery, so I improvised using my unfinished placemats.

I used my BabyLock Solaris with both Upgrade 1 and 2 installed, however this can be done with any machine that has IQ Designer and fills. All the fills I used, I believe are on the Solaris without either upgrade. The BabyLock Meridian and the Altair also have IQ Designer but I am not familar with the fills on those machines, but I am sure they have some great fills that could be used as well. This project pushed me to use some of the fills that I had looked at and admired but never really used and if I did use them I always enlarged them. So this gave me a chance to make those great fills smaller and the real focus of the project.

To create my placemats I cut 6- 4 1/2” squares (3 of each shade of blue and sewed them together alternating the blue shades.

First row: light blue, dark blue, light blue

Second row: dark blue, light blue, dark blue

Then I stitched the 2 row together and added a border on all four sides that I cut 2 3/4” wide

My finished placemat measure 12 1/2” x 16 1/4”.

After I pressed all my seams and the wrinkles and crease lines from being in the UFO box for all those years , I pressed my placemat front to a piece of fusible fleece with the fusible side next to my place mat front. I like to use a piece of fusible fleece larger than my project.

I hooped a piece of no-show mesh stabilizer, (my personal favorite is the BabyLock Cut Away NO-SHOW FUSIBLE MESH). Then I pinned my placemat top which has a fusible fleece already adherred to it on to my stabilizer.

Using Magnetic hoop from DIME 10 5/8” x 16”, hooped just my stabilizer

Stabilizer hooped with fusible fleece and placemat top pinned to stablizer

Finished the placemats by adding a backing. With right sides together of my backing and the front of my placemat I stitched all the way around leaving an opening for turning right side out. Once I had the placemat turned right side out, I gave it a quick press and did a stich-in-the-ditch between my squares and my border and did a final top stitch all the way around close to the edge of my placemat which closed up the opening I left for turning

All finished and I think these placemats look a lot better finished and on my table then they did buried in my UFO pile.

Next do I go back to the UFO pile or start a new project? Decisions, decisions…….

Valentine Table Runner Textured

Who doesn’t love the idea of love and hearts.

Valentine table runner with chenille, couching, and pleated textures.

This table runner is made completely with my Babylock Solaris with upgrade 1 and 2 installed, no purchased designs were used.

Couched Heart

The Couched Heart block was created on a Babylock Solaris with upgrade 1. It can also be created on a Solaris 2.

First, I created the center block using the embroidery couching function. This is a built in design that was added to the machine with Upgraded 1, released in 2019. Using the stamp feature I created a basic outline and with IQ Designer I closed the openings in the design so I could use and add a Fill to the background of the heart.

This design alone would look very nice duplicated and just changing the color of the yarn used in each stitch out. When I went shopping for yarn I was hoping to find a red and pink variegated but I guess the yarn companies didn’t think I needed it for this project. Or maybe it was just the store’s choice to not include a variegated variety in my choices that day.

After I finished this block I knew I wanted more texture in the other blocks so I explored some of the other features of the machine.

Pleated heart block

Creating the Pleated Heart block can be done on any machine with Babylock IQ Designer or similar.

The pleated heart is made by ironing pleats in my fabric and creating a reverse applique. I used one of the decorative stitches found in IQ Designer line properties to do the final stitch around the outside of the heart. The steps to create this block are

1. Prepare your heart fabric by pressing accordion style pleats

2. Stitch out the outline of your block -cutting size. I was making my blocks finished 8” x 12”. My first thread stop was directly on stabilizer and I stitched out an 8 1/2” x 12 1/2” rectangle. This gave me a positioning outline for my batting

3. I placed my batting inside the first stitched out rectangle. My next thread stop was an 8” x 12’ rectangle stitching the batting to the stabilizer.

4. I trimmed the batting on the outside of the stitching attaching it to the batting. This reduces batting bulk in my future seam allowances.

5. The next thread stop stitched the outline or placement guideline for my pleated fabric. This is stitched directly on the batting no fabric yet.

6. Create a heart in IQ designer using the shapes using the Line tool

7. Place the pleated fabric on top of the batting within the placement guideline for the heart. Stitched out tack down thread stop for the heart which is duplicate of the last thread stop.

8. Trim the pleated heart fabric close to the outside of the tack down stitching.

9. Place the back ground fabric in side the first 8 1/2” x 12 1/2” rectangle stitched. Stitch a tack down stitch a duplicate of the very first thread stop.

10. Stitch another heart outline over the background fabric. When this stitching stops carefully cut the inside shape of the heart out of the background fabric close to the inside of the stitched line.

11. Finally stitch another heart outline. This will stitch over the edge of the background fabric and the pleated heart fabric. This stich was created IQ Designer using the chain stitch line property. I wanted to give it a lacy look border.

12. The very last step adding a background fill from IQ Designer. I chose the rose because I think Valentines day is all about hearts and flowers. And sometimes candy is nice particularly if is expensive chocolate candy.

The Chenile Heart block can be created on any machine with IQ Designer or similar.

1. Ready your fabric to create the chenille heart. I used on piece of the block base fabric and four pieces of pink fabric. Sine I am making a 5 x 7 block for demonstration I cut my fabric pieces 6 x 6 and stacked them together.

2. Now at my machine I am going to create the same block outline stitch, batting tack down stitch, and heart outline stitch just as I did on the Couched heart block and the Pleated Heart block. If you didn’t watch either of those videos you may want to refer back to it.

3. In IQ Designer create

   1. a frame to crop

   2. diagonal stitch lines for the chenille effect.

   3. and use the crop frame to only reveal the diagonal lines inside the heart

4. Duplicate the heart outlline stitich to tack down the fabric stack for the chenille heart

5. Duplicate the the block outline to tack down the block base fabric

6. Duplicate the heart outline on the block base fabric to have a cutting line to reveal the fabric to be chenilled for the heart

7. Add a decorative stitch (I used the candlewicking stitch) on the outline of the heart

8. Add the fill design on the outside of the heart in your block

I see some chenille bunnies on my table for Easter!

Happy Valentines Day!